brand:Amana Tool
Amana 48102 Amerock 118 Diameter 12 Shank by Amana...
This bit is designed to produce a T-slot for Amerock hinges.;For the best results use in table-mounted router.;Note: These bits are not guaranteed due to fragility and application.
Amana 49521 Corner Round 78 Rad 12 Shank by Amana
600-grit finish micro grain carbide tips, It is chip-limiter (anti-kickback) geometry, High precision CNC machined tool body and tip profile, The recommended max RPM is 14,000
Amana 51582 Convex Edge 12 Shank by Amana Tool
Cuts a shallow arc-the fingernail shape-rather than a full 180-degree roundover.;Like the bullnose radius bit, it has short flats above and below the cutter arc, which produce fillets on stock thicker than 7/8.;Must be used with an edge guide on handheld...
Amana 57187 4 FLUTE FLUSH TRIM 34 DIA. by Amana...
Carbide Tipped
Amana Tool 45733 CNC Sign Making and Lettering...
Cutting diameter 9/16-inch;60-Degree angle;1/2-Inch shank, 3 flut;Carbide tipped, industrial quality
Amana Tool 45796 Finger Joint 2Flute Carbide Tipped...
Cutting diameter 1-3/8-Inch;1-9/16-Inch cutting height;1/4-Inch cutting height;1/2-Inch shank, 2 flute;Carbide tipped, industrial quality
Amana Tool 46106 CNC Spiral Flute Plunge 2Flute...
Up-cut design, great for mortising;Cutting diameter 1/2-Inch;1-1/4-Inch cutting height;1/2-Inch shank, 2-flute;Solid carbide, industrial quality
Amana Tool 46188 CNC Compression Spiral for MDF...
Cutting diameter 1/2-Inch;1-1/4-Inch cutting height;Solid carbide, industrial quality
Amana Tool 49554 Handrail and Table Edge Ogee...
Cutting diameter 2-1/2-Inch; 3/4-Inch cutting height;1/4-Inch shank, 2 flute;1/2-Inch shank, 2 flues. Carbide tipped, industrial quality. ; Maximum RPM = 16,000! Nur in einem Tisch verwenden; nicht f
Amana Tool 49560 Carbide Tipped Table Edge Thumbnail...
Cuts a shallow Ogee into the tabletop surface coupled with a bead at the edge. Bit will produce a fillet if set to cut deep enough. With the optional 3/8' Bearing, It will produce a fillet at the cut's edge. Good choice for handrails., #49560 diameter...
Amana Tool 51558 Bullnose 2Flute Carbide Tipped...
Cutting diameter 1-1/32-Inch;1-Inch cutting height, 17/64-Inch radius;1/8-Inch top and bottom radius, 1/4-Inch middle radius;1/2-Inch shank, 2-flute;Carbide tipped, industrial quality